资源类型

期刊论文 349

年份

2023 39

2022 36

2021 35

2020 23

2019 20

2018 17

2017 18

2016 8

2015 10

2014 41

2013 13

2012 6

2011 13

2010 18

2009 11

2008 9

2007 10

2006 3

2005 3

2004 3

展开 ︾

关键词

膜分离 5

力学性能 4

反渗透 3

渗透汽化 3

双极板 2

反渗透膜 2

吸附 2

机器学习 2

氧化石墨烯 2

汽车轻量化 2

纳滤 2

耐氯性 2

聚偏氟乙烯 2

聚酰胺 2

膜材料 2

超滤 2

重金属废水 2

2035 1

6016 铝合金 1

展开 ︾

检索范围：

排序： 展示方式：

Effects of operating conditions on membrane charge property and nanofiltration

Li XU, Li-Shun DU, Jing HE

《化学科学与工程前沿（英文）》 2011年 第5卷 第4期   页码 492-499 doi: 10.1007/s11705-011-1143-7

摘要： The effects of the operating pressure, cross flow velocity, feed concentration, and temperature on the streaming and Zeta potential of the membranes were studied. The permeate flux and the retention rate under different nanofiltration operating conditions were also investigated. The results show that the higher pressure, feed concentration, temperature, and lower cross flow velocity lead to the higher absolute value of streaming and Zeta potential. The permeate flux of the nanofiltration decreases with the feed concentration and increases with not only the pressure but also the cross flow velocity and temperature. The higher the pressure and the cross flow velocity, the higher the retention rate. The lower feed concentration and higher temperature leads to lower retention rate. The effects of the operating conditions on the permeate flux and the retention rate were explained by the variation of the membrane charge property.

关键词： nanofiltration membrane     streaming potential     Zeta potential     permeate flux     retention rate    

HTML PDF 收藏

Effect of electrokinetic property of charged polyether sulfone membrane on bovine serum albumin fouling

Xiaorong Meng, Shanshan Huo, Lei Wang, Xudong Wang, Yongtao Lv, Weiting Tang, Rui Miao, Danxi Huang

《环境科学与工程前沿（英文）》 2017年 第11卷 第2期 doi: 10.1007/s11783-017-0907-9

摘要： Negatively charged CMPES and positively charged QAPES membranes were fabricated. Charge modification reduced the adhesion forces between PES UF membranes and BSA. QAPES-BSA / was weaker than that of CMPES-BSA at pH 3 and on the contrary at pH 9. Flux decline rate was positively correlated with the adhesion forces of membrane-BSA. Variation of adhesion was consistent with that of potential absolute values. Negatively charged carboxymethylated polyethersulfone (CMPES) and positively charged quaternized polyethersulfone (QAPES) ultrafiltration (UF) membranes were prepared by bulk chemical modification and non-solvent induced phase separation method. The effects of PES membrane interfacial electrokinetic property on the bovine serum albumin (BSA) membrane fouling behavior were studied with the aid of the membrane-modified colloidal atomic force microscopy (AFM) probe. Electrokinetic test results indicated that the streaming potential (D ) of QAPES membrane was not consistent with its expected value, however, within the pH range of 3–10, the potentials of two charged-modified PES membranes were more stable than the unmodified membrane. When pH value was 3, 4.7 or 9, the interaction behavior between charged PES membrane and BSA showed that there was significant linear correlation between the jump distance of membrane-BSA adhesion force ( ) and the potential absolute value. Charged modification significantly reduced the adhesion of PES membrane-BSA, and the adhesion data was good linear correlated with the flux decline rate in BSA filtration process, especially reflected in the CMPES membrane. The above experimental facts proved that the charged membrane interfacial electric double layer structure and its electrokinetic property had strong ties with the protein membrane fouling behavior.

关键词： Charged PES UF membrane     BSA     Electrokinetic characterization     Adhesion force     Jump distance    

HTML PDF 收藏

Aggravation of membrane fouling and methane leakage by a three-phase separator in an external anaerobicceramic membrane bioreactor

Chao Pang, Chunhua He, Zhenhu Hu, Shoujun Yuan, Wei Wang

《环境科学与工程前沿（英文）》 2019年 第13卷 第4期 doi: 10.1007/s11783-019-1131-6

摘要：

The existence of three-phase separator did not affect COD removal in the EAnCMBR.

The existence of three-phase separator aggravated methane leakage of EAnCMBR.

The existence of three-phase separator aggravated membrane fouling rate of EAnCMBR.

Start-up of EAnCMBR equipped three-phase separator was slightly delayed.

关键词： Anaerobic membrane bioreactor     Three-phase separator     Membrane fouling     Methane leakage     Sludge property    

HTML PDF 收藏

Influence of pore size and membrane surface properties on arsenic removal by nanofiltration membranes

Nathalie Tanne, Rui Xu, Mingyue Zhou, Pan Zhang, Xiaomao Wang, Xianghua Wen

《环境科学与工程前沿（英文）》 2019年 第13卷 第2期 doi: 10.1007/s11783-019-1105-8

摘要：

Four NF membranes were compared regarding arsenate rejection and their properties.

Rejection of arsenate had no relationship with membrane pore size.

A more negative surface charge was favorable for arsenate rejection at neutral pH.

A severe membrane fouling could lead to a great reduction of arsenic rejection.

关键词： Arsenate     Nanofiltration     Drinking water     Membrane property     Membrane fouling    

HTML PDF 收藏

固定化溶菌酶的氧化石墨烯/聚醚砜杂化超滤膜制备及抗菌性能研究

朱军勇,王琼柯,许欣,刘绰绰,刘金盾,张亚涛

《中国工程科学》 2014年 第16卷 第7期   页码 23-29

摘要：

以氧化石墨烯（GO）为固定酶载体，在水溶液中通过静电吸附及氢键作用实现溶菌酶(Ly)的固定化得到GO-Ly。并将已固定化酶的GO为添加剂，以聚醚砜为膜材料，采用相转化法制备杂化超滤膜。考察了添加剂含量对膜形态、亲水性、分离性能、力学性能及抗菌性能的影响。结果表明，GO-Ly 的加入使杂化膜的亲水性及纯水通量得到明显提高，同时拉伸强度也得到一定改善；尤其当GO-Ly 添加量为1.5 %（质量分数）时，膜的纯水通量达到318 L/(m2 · h)，并且对聚乙烯醇（PVA 30 000~70 000）的截留率维持在99 %以上，对大肠杆菌的抑菌率可达68 %。

关键词： 氧化石墨烯     溶菌酶     聚醚砜超滤膜     抗菌性能    

HTML PDF 收藏

NIPS法聚偏氟乙烯超滤膜的制备与应用

吕晓龙,武春瑞,张昊,赵丽华

《中国工程科学》 2014年 第16卷 第12期   页码 35-45

摘要：

非溶剂相分离（NIPS）制膜方法是20世纪60年代发明的一种高效的制膜方法。利用该法制备的不对称膜结构赋予膜优异的选择渗透性能，膜孔结构易于调控，已经成为当前聚合物分离膜研究及商业化生产中普遍采用的方法。聚偏氟乙烯（PVDF）具有优异的综合性能，成膜性能佳，可利用NIPS法制膜。NIPS法PVDF膜的研制、膜结构控制方法及应用研究受到国际膜研究者广泛关注，是分离膜领域热点之一。本文分别针对NIPS法PVDF超滤膜制备的相分离原理研究、膜结构控制方法及膜应用研究等关键研究进展作简要介绍。

关键词： 非溶剂致相分离     聚偏氟乙烯     超滤膜     相分离原理     膜结构与性能     膜应用    

HTML PDF 收藏

A computational toolbox for molecular property prediction based on quantum mechanics and quantitativestructure-property relationship

《化学科学与工程前沿（英文）》 2022年 第16卷 第2期   页码 152-167 doi: 10.1007/s11705-021-2060-z

摘要： Chemical industry is always seeking opportunities to efficiently and economically convert raw materials to commodity chemicals and higher value-added chemical-based products. The life cycles of chemical products involve the procedures of conceptual product designs, experimental investigations, sustainable manufactures through appropriate chemical processes and waste disposals. During these periods, one of the most important keys is the molecular property prediction models associating molecular structures with product properties. In this paper, a framework combining quantum mechanics and quantitative structure-property relationship is established for fast molecular property predictions, such as activity coefficient, and so forth. The workflow of framework consists of three steps. In the first step, a database is created for collections of basic molecular information; in the second step, quantum mechanics-based calculations are performed to predict quantum mechanics-based/derived molecular properties (pseudo experimental data), which are stored in a database and further provided for the developments of quantitative structure-property relationship methods for fast predictions of properties in the third step. The whole framework has been carried out within a molecular property prediction toolbox. Two case studies highlighting different aspects of the toolbox involving the predictions of heats of reaction and solid-liquid phase equilibriums are presented.

关键词： molecular property     quantum mechanics     quantitative structure-property relationship     heat of reaction     solid-liquid phase equilibrium    

HTML PDF 收藏

Convective heat transfer in helical coils for constant-property and variable-property flows with high

Yufei MAO, Liejin GUO, Bofeng BAI, Ximin ZHANG

《能源前沿（英文）》 2010年 第4卷 第4期   页码 546-552 doi: 10.1007/s11708-010-0116-8

摘要： Forced convection heat transfer of single-phase water in helical coils was experimentally studied. The testing section was constructed from a stainless steel round tube with an inner diameter of 10 mm, coil diameter of 300 mm, and pitch of 50 mm. The experiments were conducted over a wide Reynolds number range of 40000 to 500000. Both constant-property flows at normal pressure and variable-property flows at supercritical pressure were investigated. The contribution of secondary flow in the helical coil to heat transfer was gradually suppressed with increasing Reynolds number. Hence, heat transfer coefficients of the helical tube were close to those of the straight tube under the same flow conditions when the Reynolds number is large enough. Based on the experimental data, heat transfer correlations for both incompressible flows and supercritical fluid flows through helical coils were proposed.

关键词： convective heat transfer     helical coils     high Reynolds number     supercritical pressure     variable property    

HTML PDF 收藏

A review on the application of nanofluids in enhanced oil recovery

《化学科学与工程前沿（英文）》 2022年 第16卷 第8期   页码 1165-1197 doi: 10.1007/s11705-021-2120-4

摘要： Enhanced oil recovery (EOR) has been widely used to recover residual oil after the primary or secondary oil recovery processes. Compared to conventional methods, chemical EOR has demonstrated high oil recovery and low operational costs. Nanofluids have received extensive attention owing to their advantages of low cost, high oil recovery, and wide applicability. In recent years, nanofluids have been widely used in EOR processes. Moreover, several studies have focused on the role of nanofluids in the nanofluid EOR (N-EOR) process. However, the mechanisms related to N-EOR are unclear, and several of the mechanisms established are chaotic and contradictory. This review was conducted by considering heavy oil molecules/particle/surface micromechanics; nanofluid-assisted EOR methods; multiscale, multiphase pore/core displacement experiments; and multiphase flow fluid-solid coupling simulations. Nanofluids can alter the wettability of minerals (particle/surface micromechanics), oil/water interfacial tension (heavy oil molecules/water micromechanics), and structural disjoining pressure (heavy oil molecules/particle/surface micromechanics). They can also cause viscosity reduction (micromechanics of heavy oil molecules). Nanofoam technology, nanoemulsion technology, and injected fluids were used during the EOR process. The mechanism of N-EOR is based on the nanoparticle adsorption effect. Nanoparticles can be adsorbed on mineral surfaces and alter the wettability of minerals from oil-wet to water-wet conditions. Nanoparticles can also be adsorbed on the oil/water surface, which alters the oil/water interfacial tension, resulting in the formation of emulsions. Asphaltenes are also adsorbed on the surface of nanoparticles, which reduces the asphaltene content in heavy oil, resulting in a decrease in the viscosity of oil, which helps in oil recovery. In previous studies, most researchers only focused on the results, and the nanoparticle adsorption properties have been ignored. This review presents the relationship between the adsorption properties of nanoparticles and the N-EOR mechanisms. The nanofluid behaviour during a multiphase core displacement process is also discussed, and the corresponding simulation is analysed. Finally, potential mechanisms and future directions of N-EOR are proposed. The findings of this study can further the understanding of N-EOR mechanisms from the perspective of heavy oil molecules/particle/surface micromechanics, as well as clarify the role of nanofluids in multiphase core displacement experiments and simulations. This review also presents limitations and bottlenecks, guiding researchers to develop methods to synthesise novel nanoparticles and conduct further research.

关键词： nanofluid     EOR mechanism     nanoparticle adsorption     interface property     internal property    

HTML PDF 收藏

Experimental study on compaction-induced anisotropic mechanical property of rockfill material

Xiangtao ZHANG, Yizhao GAO, Yuan WANG, Yu-zhen YU, Xun SUN

《结构与土木工程前沿（英文）》 2021年 第15卷 第1期   页码 109-123 doi: 10.1007/s11709-021-0693-0

摘要： The anisotropy of rockfill materials has a significant influence on the performance of engineering structures. However, relevant research data are very limited, because of the difficulty with preparing specimens with different inclination angles using traditional methods. Furthermore, the anisotropy test of rockfill materials is complex and complicated, especially for triaxial tests, in which the major principal stress plane intersects with the compaction plane at different angles. In this study, the geometric characteristics of a typical particle fraction consisting of a specific rockfill material were statistically investigated, and the distribution characteristics of particle orientation in specimens prepared via different compaction methods were examined. For high-density rockfill materials, a set of specimen preparation devices for inclined compaction planes was developed, and a series of conventional triaxial compression tests with different principal stress direction angles were conducted. The results reveal that the principal stress direction angle has a significant effect on the modulus, shear strength, and dilatancy of the compacted rockfill materials. Analysis of the relationship between the principal stress direction angles, change in the stress state, and change in the corresponding dominant shear plane shows that the angle between the compacted surface and dominant shear plane is closely related to interlocking resistance associated with the particle orientation. In addition, different principal stress direction angles can change the extent of the particle interlocking effect, causing the specimen to exhibit different degrees of anisotropy.

关键词： rockfill     inclination of specimen preparation     anisotropy     mechanical property     mechanism    

HTML PDF 收藏

Experimental research on the mechanical property of prestressing steel wire during and after heating

ZHENG Wenzhong, HU Qiong, ZHANG Haoyu

《结构与土木工程前沿（英文）》 2007年 第1卷 第2期   页码 247-254 doi: 10.1007/s11709-007-0031-1

摘要： The mechanical property of prestressing steel wire during and after heating is the key factor in the design of fire resistance and after-fire damage evaluation of prestressed structures. Tensile experiment of 16 prestressing steel wires ( = 1770 N/mm, = 5 mm, low relaxation of stress) at high temperature and tensile experiment of 14 prestressed steel wires after heating are carried out. According to the experiment, the shapes of stress-strain curves of steel wire at high temperature go smooth and the mechanical property indexes of the steel wire such as strength, modulus of elasticity, etc., degenerate continuously as temperature increased. According to the experiment after heating, the mechanical property of steel wire varies little when the highest temperature that the steel wire has ever been heated to is lower than 300vH; while the stress-strain curves of steel wire become more ductile and the mechanical property indexes of the steel wire degenerate gradually when the highest temperature is higher than 300vH. By applying the theory of viscoelastic mechanics, stress-strain curves of steel wire at high temperatures without loading rate influence are obtained. The law of mechanical property indexes of the wire is presented. The mathematical models of the stress-strain relationship of the pre-stressed steel wire are established. All can serve as basic data for the analysis of fire resistance and after-fire damage evaluation of pre-stressed structures.
HTML PDF 收藏

深圳城市供水系统产权结构重组模式及评价

肖文,欧阳芳锐,王先甲

《中国工程科学》 2004年 第6卷 第7期   页码 48-52

摘要：

提出了城市供水系统产权结构重组的两种基本模式，运用制度经济学和管理学理论，提出产权结构模式评价的指标与方法，分析了这两种产权结构模式的特性和在这两种模式下不同利益主体的行为与利益关系的变化特点及优缺点，并提出了缓解劣势的手段与方法。

关键词： 城市供水     产权结构     产权重组     产权模式评价    

HTML PDF 收藏

novel strategy for the construction of silk fibroin–SiO composite aerogel with enhanced mechanical property

《化学科学与工程前沿（英文）》 2023年 第17卷 第3期   页码 288-297 doi: 10.1007/s11705-022-2222-7

摘要： The practical application of silica aerogels is an enormous challenge due to the difficulties in improving both mechanical property and thermal insulation performance. In this work, silk fibroin was used as scaffold to improve the mechanical property and thermal insulation performance of silica aerogels. The ungelled SiO2 precursor solution was impregnated into silk fibroin to prepare silk fibroin–SiO2 composite aerogels via sol−gel method followed by freeze-drying. By virtue of the interfacial hydrogen-bonding interactions and chemical reactions between silk fibroin and silica nanoparticles, SiO2 was well-dispersed in the silk fibroin aerogel and composite aerogels exhibited enhanced mechanical property. By increasing the loading of silk fibroin from 15 wt % to 21 wt %, the maximum compressive stress was enhanced from 0.266 to 0.508 MPa when the strain reached 50%. The thermal insulation performance of the composite aerogels was improved compared with pure silica aerogel, as evidenced that the thermal conductivity was decreased from 0.0668 to 0.0341 W∙m‒1∙K‒1. Moreover, the composite aerogels exhibited better hydrophobicity and fire retardancy compared to pure silica aerogel. Our work provides a novel approach to preparing silk fibroin–SiO2 composite aerogels with enhanced mechanical property and thermal insulation performance, which has potential application as thermal insulation material.

关键词： silica aerogel     silk fibroin     impregnation     thermal insulation     mechanical property    

HTML PDF 收藏

Meshing stiffness property and meshing status simulation of harmonic drive under transmission loading

《机械工程前沿（英文）》 2022年 第17卷 第2期 doi: 10.1007/s11465-022-0674-6

摘要： The multitooth meshing state of harmonic drive (HD) is an important basic characteristic of its high transformation precision and high bearing capacity. Meshing force distribution affects the load sharing of the tooth during meshing, and theoretical research remains insufficient at present. To calculate the spatial distributed meshing forces and loading backlashes along the axial direction, an iterative algorithm and finite element model (FEM) is proposed to investigate the meshing state under varied transmission loading. The displacement formulae of meshing point under tangential force are derived according to the torsion of the flexspline cylinder and the bending of the tooth. Based on the relationship of meshing forces and circumferential displacements, meshing forces and loading backlashes in three cross-sections are calculated with the algorithm under gradually increased rotation angles of circular spline, and the results are compared with FEM. Owing to the taper deformation of the cup-shaped flexspline, the smallest initial backlash and the earliest meshing point appear in the front cross-section far from the cup bottom, and then the teeth in the middle cross-section of the tooth rim enter the meshing and carry most of the loading. Theoretical and numerical research show that the flexibility is quite different for varied meshing points and tangential force amplitude because of the change of contact status between the flexspline and the wave generator. The meshing forces and torsional stiffness of the HD are nonlinear with the torsional angle.

关键词： harmonic drive     meshing flexibility matrix     meshing force     loading backlash     flexspline     contact analysis    

HTML PDF 收藏

Modeling and analysis of controllable output property of cantilever-beam inertial sensors based on magnetic

Guixiong LIU, Peiqiang ZHANG, Chen XU

《机械工程前沿（英文）》 2009年 第4卷 第2期   页码 129-133 doi: 10.1007/s11465-009-0035-8

摘要： Magnetic fluid is first introduced into the traditional cantilever-beam senor. Based on the property of the cantilever-beam and the novel controllable mag-viscosity of magnetic fluid, the output of cantilever-beam sensors is under control so that the controllable output of the sensors can be realized. The mathematical model of the sensors is established and analyzed. The dynamic control function and the following educational results, which include the two curves of the displacement ratio and phase function with the different damping ratio and frequency ratio, are obtained based on the model. The result shows that it is valid to realize the controllable output of the sensors by controlling the viscosity of the magnetic fluid, and finally the expanded measurement range can be realized.

关键词： sensors     magnetic fluid     property of mag-viscosity     controllable output    

HTML PDF 收藏

标题 作者 时间 类型 操作

Effects of operating conditions on membrane charge property and nanofiltration

Li XU, Li-Shun DU, Jing HE

期刊论文

Effect of electrokinetic property of charged polyether sulfone membrane on bovine serum albumin fouling

Xiaorong Meng, Shanshan Huo, Lei Wang, Xudong Wang, Yongtao Lv, Weiting Tang, Rui Miao, Danxi Huang

期刊论文

Aggravation of membrane fouling and methane leakage by a three-phase separator in an external anaerobicceramic membrane bioreactor

Chao Pang, Chunhua He, Zhenhu Hu, Shoujun Yuan, Wei Wang

期刊论文

Influence of pore size and membrane surface properties on arsenic removal by nanofiltration membranes

Nathalie Tanne, Rui Xu, Mingyue Zhou, Pan Zhang, Xiaomao Wang, Xianghua Wen

期刊论文

固定化溶菌酶的氧化石墨烯/聚醚砜杂化超滤膜制备及抗菌性能研究

朱军勇,王琼柯,许欣,刘绰绰,刘金盾,张亚涛

期刊论文

NIPS法聚偏氟乙烯超滤膜的制备与应用

吕晓龙,武春瑞,张昊,赵丽华

期刊论文

A computational toolbox for molecular property prediction based on quantum mechanics and quantitativestructure-property relationship

期刊论文

Convective heat transfer in helical coils for constant-property and variable-property flows with high

Yufei MAO, Liejin GUO, Bofeng BAI, Ximin ZHANG

期刊论文

A review on the application of nanofluids in enhanced oil recovery

期刊论文

Experimental study on compaction-induced anisotropic mechanical property of rockfill material

Xiangtao ZHANG, Yizhao GAO, Yuan WANG, Yu-zhen YU, Xun SUN

期刊论文

Experimental research on the mechanical property of prestressing steel wire during and after heating

ZHENG Wenzhong, HU Qiong, ZHANG Haoyu

期刊论文

深圳城市供水系统产权结构重组模式及评价

肖文,欧阳芳锐,王先甲

期刊论文

novel strategy for the construction of silk fibroin–SiO composite aerogel with enhanced mechanical property

期刊论文

Meshing stiffness property and meshing status simulation of harmonic drive under transmission loading

期刊论文

Modeling and analysis of controllable output property of cantilever-beam inertial sensors based on magnetic

Guixiong LIU, Peiqiang ZHANG, Chen XU

期刊论文